MIP Pucks™, Drive System, Center, TLR SCTE 2.0, Ten Rally-X, MIP Pro4mance™ Pack #13120

MIP Pucks™, Drive System, Center, TLR SCTE 2.0, Ten Rally-X, MIP Pro4mance™ Pack #13120

  • $55.00
  • Save $8.25


UPC# 691545131207

 

PRODUCT DESCRIPTION:

Introduced in MIP/Matt Olson's TQ/Winning Set-Up for Short Course Showdown!

MIP Pucks™ Drive System for the TLR SCTE 2.0, MIP Pro4mance™, and Ten Rally-X is a low rotating mass center drive system made from 7075-T6 Aluminum. This drive system removes 40% of the rotating mass, resulting in higher acceleration and deceleration. Also with the addition of the MIP Puck™ system no longer will both bones and outdrives wear simultaneously, but the orange Pucks™ now takes the damage, and by replacing those every 20-30 runs the center drivetrain stays fresh!

TARGET CUSTOMERS:

RC Racer Enthusiasts who need high-end RC performance parts.


COMPETITIVE ADVANTAGES:

The MIP Pucks™ Drive System, Center, TLR SCTE 2.0, MIP Pro4mance™ Pack is for RC racers who need the competitive advantage of added speed and acceleration and quicker deceleration.

FEATURES:

Removes half of the weight out of the center drive system

Whisper quiet drive system that removes the noise from your drive train

A real tight drive system with no back lash

Higher acceleration & deceleration rates

Made from hard anodize 7075-T6 Aluminum

Laser badged with MIP’s approval!

100% quality made in the USA!

INCLUDES:

MIP Center Diff Aluminum Outdrive Losi Ten-SCTE (2), MIP Aluminum Lite C-CVD™ Bone Long Losi Ten-SCTE (1), MIP Aluminum Lite C-CVD™ Bone Short Losi Ten-SCTE (1), MIP Center Input Hub Losi Ten-SCTE (2), HW-BHCS 1-72 x 1/8 (6), MIP Keyed Drive Puck Ten-SCTE (8), MIP Keyed Drive Pin C-Drive Ten-SCTE (2), MIP Capture Rings C-CVD™ (2), MIP 3/16” CVD™ Coupling (2), HW-Pin 1/16 x .430 Solid Pin (2), HW-SHSS 4-40 x 3/32 Cup Point (2), HW-SHSS 8-32 x 1/8 Flat Point (2), MIP Lube & Thread Gel Cup (1), MIP Confetti Sticker (2)

REQUIRES:

.050 Allen Key – (Suggest #9000 MIP Hex Driver Wrench .050 inch)

1/16 Allen Key – (Suggest #9001 MIP Hex Driver Wrench 1/16 inch)

5/64 Allen Key – (Suggest #9002 MIP Hex Driver Wrench 5/64 inch)

COMPATIBILITY:

Losi 1.0 SCTe, TLR 2.0 SCTe, Ten Rally-X and MIP Pro4mance™ Packed SCTe

SUPPORT PRODUCTS:

(See links below for support kit items.)

Safety Data at http://miponline.com/store/msds.html

Hi Res Images at http://www.miponline.com/store/media/myparts/ or click any image herein.

*Not Responsible for typographical errors

Click HERE for Race Results, More Reviews, Gallery, and More!

"a MUST have item for any stock class racer." Facebook, Brett R.

The ULTIMATE stock racing hop up." Facebook, Brian R.

MIP PUCK System10/04/2013
By Ian Cameron
As soon as you get the bag for the MIP PUCKS system you can tell you're in for a great change to your stock losi SCTE drive line. This center drive system is considerably lighter than the standard setup. My first outing with these was at a tight, high traction indoor track in Columbus Ohio. This is where I feel that the lightened drive line can really make the difference. My truck seemed to accelerate quicker, and seemed to be more agile with the lightened system. I can't wait to see what other lightened products MIP will release for the SCTE.

5 Star ***** Associated 17.5 Pucks system advantage!11/06/2013

By Paul Peterson
I can tell you the Pucks System Helped get me a trophy. At the Last race of the season I put my Pucks system in my SC Dirt Modified and it was enough of an advantage to push me past the other competitors into the 3rd place for the season Trophy. The lighter rotating weight is what helps a lot in all "Blinky" classes... rotating weight is a big factor on speed when you can't time things. Every little bit helps in these very competitive classes. I can thank MIP for the help in me getting a little more trophy hardware this season!!!!

MIP Puck Drive System10/25/2013
By David Krider
Very impressed with the new Pucks drive system ----Eustace -you did it again ! I purchased my first MIP product in 1984 --- Trailing arms for the Tamiya Rough Rider. Thank you Dave K aka Chef Dave

kyosho sc and stadium alum axle diff kit.10/13/2013
By Charles Fowler
The new orange puck system is great and have won several races already. Great acceartion for stock 17.5 truck and sc, I did a little work and installed the first MIP RT5 Kyosho stadium truck kit together and it worked great. The way the pucks glide in the outdrives has shown no wear at all. Suggestion recommend everyone to install new ball cups on rear turnbuckles because the pucks will be a little tough to put back during a race......

5 Star ***** Puck drive system09/24/2013

By Woody Woodruff
Great product, installed the puck drive system this past weekend before the final round of the RC Pro mountain and was very pleased with the added performance they delivered. Just an example of another quality product from MIP!

Reviews

Average rating:
4 reviews

Write a review | Read all reviews

Featured positive reviews:

MIP PUCK System10/04/2013By Ian CameronAs soon as you get the bag for the MIP PUCKS system you can tell you're in for a great change to your stock losi SCTE drive line. This center drive system is considerably lighter than the standard setup. My first outing with these was at a tight, high traction indoor track in Columbus Ohio. This is where I feel that the lightened drive line can really make the difference. My truck seemed to accelerate quicker, and seemed to be more agile with the lightened system. I can't wait to see what other lightened products MIP will release for the SCTE.
Puck drive system09/24/2013By Woody WoodruffGreat product, installed the puck drive system this past weekend before the final round of the RC Pro mountain and was very pleased with the added performance they delivered. Just an example of another quality product from MIP