MAMBA MICRO X 12.6V ESC 2A PEAK BEC W Posts (CSE010016200) - Crawler Edition

MAMBA MICRO X 12.6V ESC 2A PEAK BEC W Posts (CSE010016200) - Crawler Edition

  • $74.99
  • Save $18


Putting the X in Extreme!

The

Mamba Micro X Crawler edition ESC is our latest offering for the

crawling crowd. This ESC is ideal for the weight conscious builder or

where space is limited, used in low speed crawling or trail running in

vehicles weighing up to 8lbs on 2s or 3s; it can also be used in

slightly more aggressive setups like rock racing and extended hill

climbing on vehicles up to 4lbs. Recommended motors include Castle's "Slate" crawler motors (combos available) and Holmes Hobbies Puller Pro 540 "Stubby" (≤ 2700kv)



If you're looking for a more aggressive setup in a heavier rig, like

rock racing and extended hill climbing, we recommend you run the Mamba X ESC. Your ESC will come with our new V2.02 firmware that has been enhanced for rock crawling and sensored operation.



Note: Use of an external BEC is required if running a high power or digital servo.



This SPECIAL EDITION of the Mamba Micro X includes motor solder

posts with 16 AWG wire and 4mm female bullets for the motor connection;

it also includes the matching 4mm male bullets to attach to your motor.



The Auxiliary Advantage.

Mamba Micro X features the addition of a new, programmable Auxiliary

Wire that allows you to make “on-the-go” adjustments to several settings

such as torque control, and max throttle, and fine-tune the performance

of your ESC right from the transmitter using an auxiliary channel on

the receiver. The AUX wire function is disabled by default but is

programmable via Castle Link. Once you have programmed the functionality

of the AUX wire, that setting can then be adjusted on-the-go from a

compatible transmitter. Try out the brand new Crawler Mode for incredible versatility!



Telemetry Capability

The Mamba Micro X is telemetry ready, which means owners of Futaba T4PX or 7PX Transmitters will be able to purchase the Castle Telemetry Link for S.BUS2.

Real-time data such as ESC temperature, voltages, and RPM can be

monitored to ensure performance advantages and spare you the “unknown”

parameters that all R/C enthusiasts experience at some point. Telemetry

data provides another level of protection and can increase performance.



Castle Link Compatible
With the optional Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Adjustable settings include:

  • Throttle curve
  • Braking curve
  • Drag brake
  • Auto LiPo cutoff
  • Punch Control
  • Reverse Type
  • Motor Type

Additional Castle Link benefits include:

  • Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
  • Intuitive Demo Mode capability.
  • Ability to save setup profiles for later use.

 

Package Includes:

Technical Specs
Electronic Speed Control (ESC)
Input Voltage Range: MIN: 2S LiPo
MAX: 3S LiPo (12.6V)
BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V. Use of external BEC is recommended if using a high torque/speed digital servo; the CC BEC or CC BEC 2.0 Waterproof are recommended
Operating Environment: Waterproof* design allows for use in nearly any environment.
Brake: Proportional
Reversible: Yes, but can be disabled for racing
On/Off Switch: Yes, waterproof*
Cooling Fan: No
Size: Length: 1.6" (41mm)
Width: 0.75" (19mm)
Height: 1.1" (28mm)
Weight (without wires): 1.20 oz. (34g)
Connectors: 4mm male Castle Bullet Connectors attached to replaceable 16 gauge wire; includes Castle sensor harness.
Items Needed for Operation: Battery Connector required, Castle 4mm polarized Connectors, Deans Ultra Plugs, or Traxxas Power Connect are recommended.
Product Use Statements:
  • Applying voltages higher than 12.6 volts will cause irreparable damage to your controller, voiding your warranty.
  • Recommended battery capacity is at least 1500mAh and 25C. Castle recommends running the highest mAh that will fit in your vehicle and the highest C rating you can afford.
  • The Crawler Edition Mamba Micro X has solder posts for the motor connections; includes 13 gauge wire with 4mm female bullets that connect directly to the included 1406-1900kv motors and the battery input wires are bare. You must solder the connector to the wires on the ESC. See Items Needed for Operation for recommendations.
Application Guidelines: Low speed crawling or trail running in vehicles weighing up to 8lbs. If you're looking for a more aggressive setup, like rock racing and extended hill climbing it is recommend to run the Mamba X ESC with the same motor.
Recommended Motors: Castle's "Slate" crawler motors (combos available) and Holmes Hobbies Puller Pro 540 "Stubby" (≤ 2700kv)
Max. Recommended Vehicle Weight: 8lbs when used for low speed/moderate driving style; 4lbs for more aggressive driving styles.
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software.
Telemetry Link Capable: Yes
Tech Notes: *Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.

Resources

Mamba Micro X Driver's Guide

Mamba Micro X Quick Start Guide

Sensored Motor Quick Start