Female Driver Figure - 3d Printed

  • $15.00
  • Save $10


This is a light weight 3d printed figure that is position-able. You can even order it with your own head for a setup fee.

Basic figure, choose from different head options.

Comes printed in white PLA. You detail how you want.

7 version fits perfectly in the Spare Time Hobbies light weight seats. 5.5 version fits a wraith seat.

The weight on 7 inch figure is about 64 grams
Sitting height is 105mm.

There is also the 5.5 inch version (80%) for those who want the minimum for the SORRCA rules.

Weight on the 5.5 inch version is only 40 grams.
Sitting height is 80mm.

If you want your own face or a custom face, you will need to upload minimum 4 pictures 1 of each side or your head.

Custom sizes upon request.

Use 7 inch for Axial jeep, Vaterra blazer and Bronco.  Will also fit the China JK/Wrangler, but you have to leave off the bottom part of the leg.

Use 5.5 for Vaterra K10 Truck and tf2

 

 

NOTE: This item is 3D printed. Due to the nature of 3D FDM printing this item may contain tiny visual blemishes and may require some trimming and detail painting for optimal visual appeal/fit. Similar to what you would expect to do with model parts. These blemishes in no way affect the functionality of the part. 3D printed items are susceptible to heat and may warp if left in direct sunlight. This can easily be corrected with a hair dryer or light heat gun use. Care should be taken to not leave in hot cars or direct sunlight. A coat of paint will help with this.